 |
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Search
|
| |
 |
|
 |
|
| |
1/17/05
Bent
HS710 and HS714 - I radiused a piece of aluminum
angle to put in my vise for bending HS710 and HS714.
This method worked very well for me. That is a machinists
rule between the two pieced of angle on the right to
set the second piece up high enough to make the bend
on HS714.
|
|
|
|
|
|
|
|
|
1/17/05
Bent
HS710 and HS714 - First
bend completed on HS710. I used a piece of cardboard
off of the back of a writing pad to make the template.
I was very careful not to over bend, so it took several
times in and out of the vise to get it to the correct
angle.
|
|
|
|
|
|
|
|
| |
|
1/17/05
Bent
HS710 and HS714 - Here
is the finished product. I was really happy with
them.
|
|
|
|
|
|
|
|
| |
|
|
|
|
