 |
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Search
|
| |
 |
|
 |
|
| |
06/04/05
Finished
the left and right HS ribs - I finished edge
prepping and fluting all of the left and right side
HS ribs with the exception of fluting HS404 and HS405.
|
|
|
|
|
|
|
| |
|
06/04/05
Clecoed
the left HS together - Clecoed
the skeleton together.
|
|
|
|
|
|
|
|
|
|
06/04/05
Clecoed
the left HS together - I
used my soldering iron and a ruler to remove the
protective vinyl coating from HS601PPL where the
ribs attach to the holes in the skin. I only did
this on the inside so the outside would be protected
while drilling. Thanks to Jim Smith at www.whiskeybravo.com
for passing this along.
|
|
|
|
|
|
|
|
| |
|
06/04/05
Clecoed
the left HS together - Clecoed
HS601PPL to the left HS skeleton. It is starting
to look like something that might go on an airplane!
|
|
|
|
|
|
|
|
| |
|
|
|
|
