 |
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Search
|
| |
 |
|
 |
|
| |
12/28/05
New
light weight air hose - This thing (blue hose)
is great. It is light weight and very flexible. In
combination with the swivel air hose connections it
really makes a difference in being able to quickly
move the drill motor around the work.
|
|
|
|
|
|
|
| |
|
12/28/05
New
Pneumatic Squeezer -
This squeezer is great. If you can somehow
swing the cash I recommend getting one. It will pay
itself back in your time! I ordered a set of quick
change yoke pins from Avery and it makes chaning
the yokes a breeze.
|
|
|
|
|
|
|
|
|
|
12/28/05
A
Couple of new Yokes - Got
a new longeron yoke and a 4" no hole yoke for
getting in the awkward places. I'll be sure to
comment later how useful they are.
|
|
|
|
|
|
|
|
| |
|
12/28/05
New
low range torque wrench - I
got a new 1/4" drive 5 to 50 inch/lb torque
wrench. This one will be specifically for the
AN3 bolts. They require 20 to 25 inch/lbs and
my MAC won't do the trick.
|
|
|
|
|
|
|
|
| |
|
12/28/05
New
file sets - I
got a new set of Nicholson aluminum files,
and two sets of diamond needle files for
the small work (they have already come in
handy!).
|
|
|
|
|
|
|
|
| |
|
12/28/05
Got
a couple of extra pairs of cleco pliers - I
now have three sets of cleco pliers and it
is working out great. I will load all three
up prior to starting a drilling operation,
and will reload each time they are empty. It
speeds up the process quite a bit. I got this
cleco bucket at LOWES and the cleco pliers
fit perfectly in the holes that were already
in it.
|
|
|
|
|
|
| |
|
|
|
|
