 |
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Search
|
| |
 |
|
 |
|
| |
9/11/05
Built
some dimpler tables for my DRDT-2 - I bought
some MDF from Home Depot and took some measurements
so when I put the tops on the tables would be ~1/8"
lower than the top of the die in the lower die holder.
This MDF cuts like butter on my table saw and it is
as smooth as a baby's ass. Thus, no need to put carpet
on the tables.
|
|
|
|
|
|
|
| |
|
9/11/05
Built
some dimpler tables for my DRDT-2 -
I cut the angles to match the DRDT-2.
|
|
|
|
|
|
|
|
|
|
9/11/05
Built
some dimpler tables for my DRDT-2 - I
used a pneumatic staple gun to staple the boxes
together and ran the pressure high enough so
I got 1/16" coutersink on the staples.
|
|
|
|
|
|
|
|
| |
|
9/11/05
Built
some dimpler tables for my DRDT-2 - Finished
product.
|
|
|
|
|
|
|
|
| |
|
9/11/05
Built
some dimpler tables for my DRDT-2 - Finished
product from another angle.
|
|
|
|
|
|
|
|
| |
|
9/11/05
Built
some dimpler tables for my DRDT-2 - This
picture does not show it well, but the die
is just slightly higher than the tables.
I didn't write down the measurements, but
if you want them shoot me an e-mail I'll
send them to you. If I have time in the future
I'll put them in a document and link it here.
|
|
|
|
|
|
| |
|
|
| |
|
